A pedicle screw spine stabilisation course introducing the invetra system
Pedicle screw fixation systems have been standard in human practice for quite some time. Only now though has a system been designed and manufactured from the ground up specifically for the veterinary industry in a 5.5mm and a 3.0mm system.
The course is a varied mixture of theory and practical, but with the focus heavily on the practical aspect. An initial surgery on a real-case 3D model will be undertaken by each participant before moving into the wet-lab. This model will be kept by each attendee.
9.00 - 9.30 Introduction
9.30 - 10.00 Lecture
Introduction to and the history of pedicle screw fixation
10.00 - 10.30 Laboratory
Introduction to equipment and application of 4.5mm pedicle screws on the 3D printed model
10.30 - 11.15 Lecture
Application on the lumbosacral spine and lumbar spine
Break
11.30 - 13.00 Laboratory
Approach and placement of pedicle screws in L7-S1 of cadaver lumbosacral stabilisation and fracture of L2-3 fixation
Lunch
14.00 - 15.00 Lecture
Techniques for stabilisation of the thoracic and cervical spine using the invetra™ system
15.00 - 16.45 Laboratory
Thoracic and cervical fixation using the invetra™ system
Close
We would like to invite residents to this pedicle screw fixation course taught by Dr Robert Bergman DACVIM to gain knowledge and skills to successfully perform spinal stabilization surgery.
Not only will there be no charge for the course, we are offer $500 towards your travel and accommodation expenses as well as evening entertainment in Vegas!
Pedicle screw fixation systems have been standard in human practice for quite some time. Only now though has a system been designed and manufactured from the ground up specifically for the veterinary industry in a 5.5mm and a 3.0mm system.
The course is a varied mixture of theory and practical, but with the focus heavily on the practical aspect. An initial surgery on a real-case 3D model will be undertaken by each participant before moving into the wet-lab. This model will be kept by each attendee.
This unique offering is on a first come, first served basis.
For any other questions, please contact Charles Achonye at charles@orthomedusa.com
9.00 - 9.30 Introduction
9.30 - 10.00 Lecture
Introduction to and the history of pedicle screw fixation
10.00 - 10.30 Laboratory
Introduction to equipment and application of 4.5mm pedicle screws on the 3D printed model
10.30 - 11.15 Lecture
Application on the lumbosacral spine and lumbar spine
Break
11.30 - 13.00 Laboratory
Approach and placement of pedicle screws in L7-S1 of cadaver lumbosacral stabilisation and fracture of L2-3 fixation
Lunch
14.00 - 15.00 Lecture
Techniques for stabilisation of the thoracic and cervical spine using the invetra™ system
15.00 - 16.45 Laboratory
Thoracic and cervical fixation using the invetra™ system
Close
About this course:
The skills taught will be a brief discussion of neurologic localisation, SOP instrumentation, thoracolumbar hemi-laminectomy, fenestration, stabilisation of lumbar fractures with SOP locking spinal plates, cervical slot decompression, dorsal laminectomy for lumbosacral decompression and stabilisation of L7 fractures
There will be five sessions beginning with theory and detailed step-by-step description of the procedures followed by a demonstration of the procedures by the faculty on a cadaver.
The attendees will then repeat the procedures on cadavers as many times as required. The highest quality instrumentation will include specialised spinal instrumentation, high-speed burrs, drills and the latest innovative and industry leading implants.
Overview Agenda:
- Anatomy, technique and instrumentation
- TL laminectomy
- Fenestration
- Lumbar stabilisation
- Cervical slot decompression
- Dorsal laminectomy / discectomy for LS compression
- L7 vertebral fracture repair
About this course:
The level of this course is designed and aimed and skilled surgeons already experienced is neruo surgery, Covering laminectomies and ventral slot decompression, it then goes on to allow you to expand your repertoire with highly advanced technical procedures such as stabilisations, craniotomies and introduction to stenting.
There will be five sessions beginning with theory and detailed step-by-step description of the procedures followed by a demonstration of the procedures by the faculty on a cadaver.
The attendees will then repeat the procedures on cadavers as many times as required. The highest quality instrumentation will include specialised spinal instrumentation, high-speed burrs, drills and the latest innovative and industry leading implants.
Overview Agenda:
- Dorsal cervical laminectomy
- Lumbar corpectomy
- LS stabilisation
- LS foraminotomy
- Cervical stabilisation
- AA stabilisation
- Thoracic plating stabilisation
- Craniotomies
- Introduction to pedicle screw fixation
- Introduction to ventriculoperitoneal shunts
Empowering you with knowledge to improve animal care
Giving you the ability to heal and improve patients lives
Enabling you to have confidence to increase your surgical repertoir
The support you receive doesn’t stop once you leave the classroom
We offer a platform solely dedicated to online education offering an array of objective knowledge tools, webinars, bite-size courses and hubs, many of which are available at no cost allowing you to not be restricted to learn and develop skills to improve the industry.
Also, we are the first animal health company to bring virtual reality training technology to the veterinarians worldwide. RoVR™, the first-of-its-kind training experience, is proven to significantly impact surgical performance and bring together veterinarian healthcare professionals to train from anywhere in the world through remote collaboration.
Channeling skills they have learned throughout their careers to delegates in the classroom, once the workshop has finished the support and relationship continues – a value we hold dear.
